Sky Blue Metal Floor Hardener
Sky blue Metal Floor Hardener Product introduction:
Sky Blue Metal Floor Material commonly known as Emery wear-resistant floor, widely used, rapidly popular throughout the country to become the perfect replacement of terrazzo floors; suitable for industrial venues, docks, parking, commercial shops, logistics and other ground decoration. With pressure, dust reduction, hard surface, easy to clean, economical and other advantages.Curing Agents,Oil Curing Agent.
Sky blue metal floor hardener Performance characteristics: 1. Resist shock, pressure and mechanical properties; 2. Dustproof, mildewproof, wearable, good hardness; 3. Stress resistance, wear resistance, dust removal, enhanced surface oil resistance, anti-permeability; 4. The appearance of smooth, bright and colorful; 5. Easy to clean and maintain. Use a fixed year
Synchronize with concrete ground.
Sky Blue Metal Floor basic requirements:
The concrete foundation requires concrete strength above C25, water-cement ratio below 0.50, concrete slump should be controlled within 70-100mm, concrete mixing station can reduce segregation and control bleeding. To ensure that concrete mixes are fully liquefied and conducive to construction, concrete admixtures are recommended. The concrete shall be cast and vibrated in accordance with the standard of high-quality concrete, and pay attention to the size of the construction and reduce the slurry. When the surface of the hardener and the concrete structure are constructed at the same time, if the construction is completed at the same time, the use of fine aggregate concrete is recommended. The thickness of the concrete screed should not be less than 50 mm, and special attention should be paid to the construction of cornerstone concrete blocks when considering retractable steel fibers. Make sure the concrete vibrates and take extra reinforcement.Water-Based Curing Agent,Epoxy Antistatic Self-leveling Floor.
Metal Floor Hardener Construction Technology: Surface treatment: The surface of concrete should be removed by a mechanical spatula on the plate. Zibo silicon carbide wear floor materials: 2 / 3 prescribed amount of hardened wear-resistant flooring materials should be uniform for the first time in the initial setting phase of the concrete surface distribution, and polishing low-speed smoothing machine;
Leveling: Use a 6-meter spatula to distribute the abrasive material evenly and horizontally. The second cloth material: The amount is to be specified that the third color cloth is evenly clothed with gold-plated wear-resistant floor materials (the surface of the silicon carbide wear-resistant floor material after the first grinding), and then polished with a flat machine; the surface is polished: according to the concrete In case of hardening, adjust the blade angle of the polisher to ensure surface finish and finish. The grass-roots floor continues to expand: Emery wear-resistant floor is to be carried out on the ground within 4 to 6 hours after construction, so as to prevent surface water from evaporating and sharply guarantee the stable growth of the strength of the corundum wear-resistant floor.Epoxy Anti - Static Level Coating.
Looking for ideal Metal Hardening Process Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Metal Hardening Oven are quality guaranteed. We are China Origin Factory of All Metal Hardener. If you have any question, please feel free to contact us.
Product Categories : Floor Coating Series > Metal Floor Hardener