Peacock blue metal surface hardener Product introduction:
Peacock Blue Metal Floor Material is suitable for ground decoration needs of industrial sites, docks, parking lots, commercial stores, logistics warehouses, etc. With wear and compression resistance, reduce dust, hard surface, easy to clean, economical and durable advantages.
Peacock Blue Metal Wear-resistant Material Performance characteristics: 1, impact resistance, heavy pressure, good mechanical properties; 2, dust, mold, wear, hardness is good; 3, resistance to heavy pressure, strong wear resistance, can not afford to dust, enhance the ground oil resistance, anti-infiltration; 4, the appearance of bright, colorful and diverse; 5, easy to clean, easy to maintain. Useful life Synchronize with concrete ground
Metal Floor Hardener Basic requirements: The concrete strength of the grass-roots level shall be above C25, the water-cement ratio shall be controlled below 0.50, the difference between the concrete fall-out shall be controlled within 70-100mm, and the concrete mixture shall minimize segregation and control of bleeding; in order to ensure adequate flow of the concrete mixture Sex and construction are conducive to construction, it is recommended that concrete be added with proper additives. Grass-roots concrete should be poured and tamped with reference to the standard of fine concrete, pay attention to the size and reduce laitance production. The hardener surface is constructed simultaneously with the concrete structure layer. If the same leveling layer is to be applied at the same time, it is recommended that the leveling concrete should be fine stone concrete with a thickness of not less than 50mm. Consider configuring the telescopic reinforcement mesh with special attention to the corners of the concrete construction block. Ensure that the concrete in the area is vibrated and compacted and additional strengthening measures should be taken.
Construction process: Surface treatment: Use a machine equipped with a disc to evenly remove the laitance layer on the concrete surface; first spread the silicon carbide wear-resistant floor material: spread the prescribed amount of 2/3 hardened wear-resistant flooring material evenly. After the concrete surface of the initial coagulation stage, it is polished with a low-speed screeding machine;
Scratch ruler leveling: Use a 6m scraper to evenly and horizontally erase and rough level the corundum wear-resistant flooring material; second time spread the material: uniformly spread the prescribed amount of 1/3 color diamond abrasive wear-resistant flooring material. (After the surface of the first ground diamond abrasive wear-resistant floor material), it is polished again with a trowel; surface polishing: According to the hardening of the concrete, the angle of the blade on the polishing machine is adjusted, and the surface polishing operation is performed to ensure the surface flatness. Smooth finish; base surface expansion: Emery wear-resistant floor should be maintained on the surface within 4 to 6 hours after the completion of the construction to prevent the rapid evaporation of surface moisture and ensure a steady increase in the strength of the diamond abrasion resistant floor.
Looking for ideal Peacock Blue Metal Floor Material Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Peacock Blue Metal Wear-resistant Material are quality guaranteed. We are China Origin Factory of Peacock Blue Metal Wear Floor. If you have any question, please feel free to contact us.
Product Categories : Floor Coating Series > Metal Floor Hardener